So I've finally got everything up and running. I can home everything no problem with cncjs. My only issue is controlling the spindle via the computer. I've followed all the instructions in the guide from Mr Beaver. Soldered PWM and GND pins onto the board, ran PWM to VI and GND to ACM, shorted DCM/For. Did the settings on the VFD. When I first plug in the VFD, the spindle starts up with it. Not sure if that's supposed to happen or not. I can stop it with the VFD. When I try to use my tablet to turn it on it doesn't work. I've been trying M3 and M4 in CNCJS. The only thing I can think is maybe trying to use the other set of PWM/GND pins? I was using the ones actually labled PWM/GND, but in the guide he uses #3 and #6 from the set of 6. Anyone else have any ideas/input?
Hello, I'm looking for the spacing between the Drag chain bracket mount holes and the Suckit Ears. I tried Carbide3d Support but they said they couldn't help me. I just bought it a week or so ago so It's the latest version. I just noticed a few days ago they switched to black Anodizing. Unfortunately they sent me black Suckit ears, Didn't have any blue ones left :( Thanks, Jeffery